Clothes Dryer Not Working Troubleshooting Guide
Save time and money by repairing your dryer yourself with expert troubleshooting advice and basic repair methods. The idea of troubleshooting common broken dryer symptoms may seem daunting, but in fact, repairing some types of clothes dryers is surprisingly simple.
A general repair can be performed without opening the dryer, and a repair that requires removing the main cover can be manageable if you have the know-how. There are some common dryer problems that you can fix a dryer yourself without calling a repair technician when dryers are not working properly.
Dryer Is Making Noise
Cause:
If you hear knocks or vibrations, the dryer may not work properly. Each dryer side is adjustable and should line up front to back and side to side. Coins, buttons, or paper clips can get stuck between the drum and the front or back of the dryer.
Solution:
Make sure the dryer is not blocked by small objects. Check drums with a flashlight and remove all items. Always check and empty the bag before putting it in the washer or dryer. If you hear loud noises, your clothes may be tied or tangled. You may not have set the dryer properly. Remove knotted items and shake to complete the drying cycle before turning on.
Gas Heater In Dryer Is Not Working
Cause:
In dryers, the heat provided by the gas heater is controlled by the air shutter. Gas heaters are often the cause of heating or drying problems. Often these problems can be solved by adjusting the louvers on the gas burner at the bottom of the dryer.
Solution:
To adjust the damper, loosen the screw and remove the gas flame cover. Turn on the dryer to light the fire. If the flame is dark blue and you can hear air hissing around the burner, there is too much air in the air/gas mixture.
If the flame has a yellow tip, there is not enough air in the mixture. Slightly loosen the two screws to increase or decrease the airflow to the burner. The flame will turn blue instead of yellow and keep spinning until it stops hissing. If the electric igniter is defective, have it replaced by a service technician. You can also search on google, affordable dryer repair near me.
Dryer Doesn’t Tumble
Cause:
If the dryer runs but doesn’t spin, chances are there’s a problem with the motor or the belt connecting the motor to the drum. To resolve this, you will need to open the dryer. The dryer belt can be changed.
Solution:
If necessary, use a work light and a voltage tester to check the outlet is connected to the mains. Check that door is fully closed, the timer is set to the correct position, and the correct cycle has been selected. Check the breaker or fuse used in that circuit. The dryer can be serviced with two circuit breakers or fuses.
Unplug the dryer and check the power cord and terminal block connected to the dryer. Replace the code if necessary. It is usually located inside the opening, where the door presses when closed. Otherwise, it may be damaged. Remove the switch, check, and replace if necessary. If the dehumidifier still does not work, the fuse or other electrical component may be faulty.
Cycling Thermostat Is Defective
Cause:
Cycle thermostats can regulate the temperature inside your dryer. It works by using the heater element to turn it on or off to keep the correct temperature. Once the thermostat is running for a long time, it won’t be able to know the exact temperature, other than to keep the temperature uniform. It can also cause the dryer to overheat or not turn off when you need it to.
Solution:
You can now check if the bike thermostat is faulty by using a multimeter. Just join the multimeter to see the results in the appropriate terminals. If the display shows an infinity reading, this indicates that the thermostat is damaged and needs to be replaced.
The Drum Is Spinning, But There’s No Heat
Cause:
A blown thermal fuse could be the cause. Modern dryers have blown fuses that can completely clog the dryer. This fuse is installed to prevent fire. The fuse may wear out on its own but is designed to short at higher normal temperatures for several reasons. Look for clogged ventilation, clogged lint filter, or overloaded machines.
Solution:
A blown fuse must be replaced to solve this problem. To do this, you must first find it. It should be located near the exhaust, so should power off and remove the rear panel. Loosen the fuse and replace it with a new one. You can find replacement fuses at your local hardware store or online.
Dryer Duct Is Obstructed
Cause:
The dryer may or may not have ventilation. The ventilation system must be equipped with air ducts. The duct system works by venting hot air out. Therefore, if the ducts are blocked, hot air will be trapped inside the dryer and overheat. You may also notice that clothes take too long to dry or become warm to the touch after a drying cycle. You can also smell a burning smell coming from the dryer. In the worst case, it can cause a fire.
Solution:
To avoid this hazard, clean the air ducts at least regularly. This includes removing lint, dust, dirt build-up, and other unwanted debris. If the conduit is made of ductile material, make sure it is straight and not bent.
