WHY WON’T THE REFRIGERATOR DOOR STAY OPEN?
A refrigerator is a mandatory appliance for every household and is used 24/7. It is alarming if your refrigerator is creating problems and its door is not staying open even for a minimal time. You need to resolve this as soon as possible to protect your food from being rotten.
Imagine reaching your refrigerator in search of food at midnight. Opening your refrigerator and searching for your favorite snacks amidst raw milk and cheese is difficult so you have thought to put them out but your door is not staying open. You have to fix it so that it remains open and you get your desired snack easily.
DIY repair or professional refrigerator repair service, both are beneficial depending upon the situation you have encountered. Here are listed some reasons and repairs to discuss why does a refrigerator door closes quickly and how to make it error-proof.
Table of contents
- AUTOMATED DOORS:
- UNPLUG APPLIANCES:
- REPLACE CLOSING CAM:
- SELECTING CORRECT CAMS:
- BACK LEVELERS:
- PERFECT LEVELING:
- REPAIR HINGES:
- REMOVE LOCK CLIPS:
- SECURING OLD CLOSING CAMS:
- CONFIRMING ALIGNMENT:
- WATER DISPENSER TUBE:
- REINSTALL LOCK CLIP:
- RETHREADING SCREWS:
- PLUG APPLIANCES:
- HIRE PROFESSIONALS IF REQUIRED:
How To Fix A Refrigerator Or Freezer Door That Won’t Stay Open
Some refrigerators have automated doors to avoid an escape of cool air. It can be accidental to leave the refrigerator door open, so modern refrigerators have a function to close their doors after some minutes. In this case, there isn’t any fault with your appliance.
Otherwise, if your refrigerator door is not staying open, you should follow the steps below to make it work perfect:
Before starting the repair, unplug your appliance to avoid any accident like an electric shock, etc. Make sure that no active electronic device is physically attached to your refrigerator. Water can seep out of a repairing refrigerator, affecting your electronics and resulting in an accident.
3.REPLACE CLOSING CAM:
A door closing cam is an element, used to fix a refrigerator door in its place. In other words, it allows an opened door to be fixed at its place. There are two cams installed on a refrigerator door. An upper closing cam and a lower closing cam. It can be a maximum possibility that your door cams are worn out and ready for replacement.
4.SELECTING CORRECT CAMS:
Your refrigerator brand varies from your friends or family members. So, do not follow them in purchasing door closing cams. Consult an appliance repair company to select the correct cams for your refrigerator model. It will make replacement faster and easier.
Are you stressed about the immediate closing of automated doors? Resolve your problem by adjusting back levelers. Extend the rear part of a refrigerator by two turns without imperiling your refrigerator door. Another point is to adjust your refrigerator such that storage items do not roll out of it.
Imperfect leveling causes the door to close. Examine the level of your refrigerator from the front towards the back. Not only the refrigerator, but your floor also requires leveling. Bumps in the floor can cause disturbance as well.
Unparallelly and worn-out hinges also result in the closing of a door. Your door will seal tight with a gasket if hinges will not be placed correctly.
8.REMOVE LOCK CLIPS:
Lock clips are used in the refrigerator to attach a tube from the water line coupler. A waterline coupler is present if a water dispenser is attached to the refrigerator. To repair your refrigerator door, an open-ended wrench is used to remove lock clips to detach the tube.
9.SECURING OLD CLOSING CAMS:
You can secure your old closing cams and use them in the bottom if they can still be used rather than wasting them. Fix them by using screws.
Check the alignment of the door by aligning hinges in a parallel manner. Confirm if your door is in right place and then tighten screws.
Silicone-based grease is required for lubrication before door installation. Make contact with the lower cam to reduce friction proposed by the installed cams.
12.WATER DISPENSER TUBE:
If your refrigerator has a water dispenser, reinstall a tube for it. Harness your dispenser by using a strong wire. Pass it from a hinge pin. Now, install the refrigerator door.
13.REINSTALL LOCK CLIP:
A lock-clip is again installed to fix the water dispenser tube with the water line coupler.
Rethreading a screw is a crucial step in refrigerator door repair. Check alignment of a floor, base of refrigerator, hinges, water dispenser, lock clips, and cams before rethreading screws. This comprehensive examination will save your time and energy.
Plug appliances with the switchboard and analyze if you have performed your task perfectly or not. Check its overall performance and satisfy yourself.
16.HIRE PROFESSIONALS IF REQUIRED:
Your door can have a major fault that cannot be repaired by yourself. If you have given it a try and still not successful, hire a professional for it. Go for refrigerator repair companies that are licensed and hand over this task to them.
Thus, repairing a refrigerator door that is not staying open is not an issue if you have a complete guide to follow. Having perfect equipment and an accurate skill set can help you search for food without worrying about the refrigerator door.